Subscribe to our newsletter!

Wishlist Customer Service My Account Track Order
  • SHIPPING INCLUDED on all orders to India and USA

  • SHIPPING INCLUDED on all orders to India and USA

Showing 1–12 of 68 results


  • This pack has been put together keeping Badami climbing season in India in mind. The pack includes the following equipment

    5 pcs. M10 Dynamo Rock Hanger (Material grade: SS 304)
    5 pcs. M10 Nuts only (Material grade: SS 304)
    1 pc. Badami Nut Tool
    Hangers have EN959 and CE 3076 certification
    Breaking Strength of Hangers: 32kN in Radial direction of loading

  • One Tool to rule them all!

    A versatile nut tool designed for Trad, mixed- Sport and Big Wall climbing. Tightens nuts and maillons, wriggles out those obstinate nuts, and the hooked nose grabs onto cam bars in the deepest cracks. The screw driver end helps undo those stubborn knots, works as a pry tool, and finding an additional new use for this multi-tool is not a challenge.

    – Weight: 64 g (2.3 oz.)
    – Material: Zinc plated hardened Steel
    – Built in wrenches of sizes 13, 17 & 19 mm, which work with 10, 12 mm & 3/8 inch Rawl bolts, open wrench sizes 14 & 17mm
    – Philips head screw driver
    – Centimeter markings along the side

  • Chalk bags made from a blend of cotton and woolen yarns and colored in organic vegetable dyes. The bag features a cinch cord to close the mouth of the chalk bag in order to prevent the chalk from spilling. Sturdy Nylon loop to anchor the chalk bag to your harness.

  • This is our versatile and ultralight travel canopy for staying in a bivouac or resting in shade while you are out climbing in crags. It features Polyester fabric with 1,500 mm Hydrostatic Head waterproof PU coating and fully taped seams. There are 6 guy out points and 6 webbing loops. Any of these could be used either to anchor the canopy to the ground or trees using guy lines or your could simply pitch it using your trekking poles and make an A-shaped bivouac. There are several possibilities of how you pitch it.

    Size: 3 x 3 meters
    Weight: 580 grams

    Colour: Glacier Blue

  • - Stainless Steel 304 Rock hangers for outdoor use (not marine grade).
    – Bore diameter: 10mm
    – This hanger features chamfered edges of the eye hole to minimize wear on carabiner. The eye hole itself is large enough to accommodate two carabiners.
    – Choose the bolt size carefully depending upon strength of base rock material. If the rock is soft or has uneven composition such as Sandstone and Limestone, then any rock anchor, including ours will not be strong enough to endure heavy loading.
    – This anchor is not recommended for use in coastal areas because it may not last as long as it normally should. For areas within 100 kms of coastline we recommend the anchors must be made in marine grade Stainless Steel. Contact us if you want these to be custom made!
    – If you are combining our hangers with your own bolts, ensure that they are made from the same grade of metal.
    – Each hanger is tested at a proof load of 8kN before shipping. You will be able to see a very small indentation on the side of the eye-hole. That is because it was tested in our lab for your safety.

    The recommendation below is based on several assumptions. Do your own due diligence before installing an anchor anywhere.

    M10 bolt: Only to be used in very hard rocks such as Granite (Compressive Strength > 75MPa)
    M12 Bolt: Only to be used in medium to high hardness rocks such as Sandstone (Compressive Strength > 30MPa)

    – EN959:2007, CE3076

    • Minimum Breaking Strength of Hanger is 25kN. Although the older versions are marked with 22kN, we guarantee 25kN. We take factor of safety into account with this figure of 25kN. Gipfel hangers are tested for breaking load often and none of them has ever failed under 38kN (the average breaking load has been 40kN) in both recommended direction of loading (radial) as well as in axial direction (Tensile).
    • Cutting Strength (Radial Load) in 50MPA test concrete block: 25kN (For Both M10 & M12 Sizes)
    • Pull-out strength (Axial load) in 50MPA test concrete block: 25kN (for M12 bolt) and 15kN (for M10 bolt)

    User Instructions    Download the PDF
    User Instructions    Download the PDF

  • - Pack of 5
    – Stainless Steel 304 Rock hangers for outdoor use (not marine grade).
    – Bore diameter: 10mm
    – This hanger features chamfered edges of the eye hole to minimize wear on carabiner. The eye hole itself is large enough to accommodate two carabiners.
    – Choose the bolt size carefully depending upon strength of base rock material. If the rock is soft or has uneven composition such as Sandstone and Limestone, then any rock anchor, including ours will not be strong enough to endure heavy loading.
    – This anchor is not recommended for use in coastal areas because it may not last as long as it normally should. For areas within 100 kms of coastline we recommend the anchors must be made in marine grade Stainless Steel. Contact us if you want these to be custom made!
    – If you are combining our hangers with your own bolts, ensure that they are made from the same grade of metal.
    – Each hanger is tested at a proof load of 8kN before shipping. You will be able to see a very small indentation on the side of the eye-hole. That is because it was tested in our lab for your safety.

    The recommendation below is based on several assumptions. Do your own due diligence before installing an anchor anywhere.

    M10 bolt: Only to be used in very hard rocks such as Granite (Compressive Strength > 75MPa)
    M12 Bolt: Only to be used in medium to high hardness rocks such as Sandstone (Compressive Strength > 30MPa)

    – EN959:2007, CE3076

    • Minimum Breaking Strength of Hanger is 25kN. Although the older versions are marked with 22kN, we guarantee 25kN. We take factor of safety into account with this figure of 25kN. Gipfel hangers are tested for breaking load often and none of them has ever failed under 38kN (the average breaking load has been 40kN) in both recommended direction of loading (radial) as well as in axial direction (Tensile).
    • Cutting Strength (Radial Load) in 50MPA test concrete block: 25kN (For Both M10 & M12 Sizes)
    • Pull-out strength (Axial load) in 50MPA test concrete block: 25kN (for M12 bolt) and 15kN (for M10 bolt)

    User Instructions    Download the PDF
    User Instructions    Download the PDF

  • - Stainless Steel 304 Rock hangers for outdoor use (not marine grade).
    – Bore diameter: 12mm
    – This hanger features chamfered edges of the eye hole to minimize wear on carabiner. The eye hole itself is large enough to accommodate two carabiners.
    – Choose the bolt size carefully depending upon strength of base rock material. If the rock is soft or has uneven composition such as Sandstone and Limestone, then any rock anchor, including ours will not be strong enough to endure heavy loading.
    – This anchor is not recommended for use in coastal areas because it may not last as long as it normally should. For areas within 100 kms of coastline we recommend the anchors must be made in marine grade Stainless Steel. Contact us if you want these to be custom made!
    – If you are combining our hangers with your own bolts, ensure that they are made from the same grade of metal.
    – Each hanger is tested at a proof load of 8kN before shipping. You will be able to see a very small indentation on the side of the eye-hole. That is because it was tested in our lab for your safety.

    The recommendation below is based on several assumptions. Do your own due diligence before installing an anchor anywhere.

    M10 bolt: Only to be used in very hard rocks such as Granite (Compressive Strength > 75MPa)
    M12 Bolt: Only to be used in medium to high hardness rocks such as Sandstone (Compressive Strength > 30MPa)

    – EN959:2007, CE3076

    • Minimum Breaking Strength of Hanger is 25kN. Although the older versions are marked with 22kN, we guarantee 25kN. We take factor of safety into account with this figure of 25kN. Gipfel hangers are tested for breaking load often and none of them has ever failed under 38kN (the average breaking load has been 40kN) in both recommended direction of loading (radial) as well as in axial direction (Tensile).
    • Cutting Strength (Radial Load) in 50MPA test concrete block: 25kN (For Both M10 & M12 Sizes)
    • Pull-out strength (Axial load) in 50MPA test concrete block: 25kN (for M12 bolt) and 15kN (for M10 bolt)

    User Instructions    Download the PDF
    User Instructions    Download the PDF

  • - Pack of 5
    – Stainless Steel 304 Rock hangers for outdoor use (not marine grade).
    – Bore diameter: 12mm
    – This hanger features chamfered edges of the eye hole to minimize wear on carabiner. The eye hole itself is large enough to accommodate two carabiners.
    – Choose the bolt size carefully depending upon strength of base rock material. If the rock is soft or has uneven composition such as Sandstone and Limestone, then any rock anchor, including ours will not be strong enough to endure heavy loading.
    – This anchor is not recommended for use in coastal areas because it may not last as long as it normally should. For areas within 100 kms of coastline we recommend the anchors must be made in marine grade Stainless Steel. Contact us if you want these to be custom made!
    – If you are combining our hangers with your own bolts, ensure that they are made from the same grade of metal.
    – Each hanger is tested at a proof load of 8kN before shipping. You will be able to see a very small indentation on the side of the eye-hole. That is because it was tested in our lab for your safety.

    The recommendation below is based on several assumptions. Do your own due diligence before installing an anchor anywhere.

    M10 bolt: Only to be used in very hard rocks such as Granite (Compressive Strength > 75MPa)
    M12 Bolt: Only to be used in medium to high hardness rocks such as Sandstone (Compressive Strength > 30MPa)

    – EN959:2007, CE3076

    • Minimum Breaking Strength of Hanger is 25kN. Although the older versions are marked with 22kN, we guarantee 25kN. We take factor of safety into account with this figure of 25kN. Gipfel hangers are tested for breaking load often and none of them has ever failed under 38kN (the average breaking load has been 40kN) in both recommended direction of loading (radial) as well as in axial direction (Tensile).
    • Cutting Strength (Radial Load) in 50MPA test concrete block: 25kN (For Both M10 & M12 Sizes)
    • Pull-out strength (Axial load) in 50MPA test concrete block: 25kN (for M12 bolt) and 15kN (for M10 bolt)

    User Instructions    Download the PDF
    User Instructions    Download the PDF

  • Inspired from Japanese Kimono, this Poncho is made from light weight rip stop Nylon with 1,000 mm waterproof PU coating. If the large drapes bother you too much in the wind, this poncho features built-in Kimono straps that could be tied around the waist. The hood is comfortably large and neck is wide so that you can put it on and take it off with ease even if you are wearing glasses and a helmet. Shoe lace cords around the neck can be used to tighten reduce the exposed facial area. This poncho can be worn on top of your mountaineering pack. Because this product has been designed with utmost care and a lot of thinking we vouch for the fact that you will absolutely love it.


  • Although a very simple product, this waist belt is made from the best quality materials that will last for a long time. It features both side adjustable YKK snap buckle and Polyamide straps. The dual adjustable buckle allows the belt to be tightened from both sides of your waist for proper centering. Because of excellent compatibility of webbing with buckle, the straps don’t slip during use. This feature ensures that the belt don't loosen up and that you don’t have to tighten your belt nor re-position it while climbing. To sum it up, we know that you will love this product!

  • Lupus 2 is our most economical 2 persons and 3 seasons tent (we suggest 3 seasons usage but its construction enables it to be occassionally used as an all seasons tent with moderate snow). While it is economically priced it does not compromise on the quality at all because all our tents are made from same Aluminium poles, Japanese zippers and textiles. It is the simplistic design and single door-single vestibule construction that makes it economical. This is an outer-first tent in which the outer rainfly and inner tent are connected together using a suspension system. Some of the special features that makes this tent so special and different from most tents in the same dome design are

    1) 7000 series aviation grade Aluminium poles
    2) Patented Jake's foot construction to clip the poles to the inner tent and the outer rainfly (to understand how Jake's foot works, see one of the accompanying product images here)
    3) 3,000 mm PU coated Polyester rainfly that has proven record of withstanding heavy thunderstorms experienced typically in Himalayas for a minimum of 8 hours. While other tents leak in an hour or two, this tent still goes strong!
    4) In addition to 4 internal pockets, the inner canopy also features a gear loft on the top.
    5) Double layered doors for ventilation whenever needed. The doors have mesh and fabric layers.
    6) The rear of the tent has mesh on inner canopy and a storm vent on the rainfly that can be lifted and tied in position to allow for ventilation from the rear of the tent.

    TECHNICAL FEATURES

    o Floor Size: 145 x 220 cm
    o Peak height: 110 cm
    o Outer rainfly: 68D Polyester with 3,000 mm PU coating and DWR treatment on outside
    o Ground sheet: Polyethylene
    o Inner Canopy: Polyester mesh and Polyester taffeta
    o Poles: 9.5mm Pressfit DAC aluminium poles made from Aviation aluminium Guy ropes: 4
    o Weight: 2.2 kg (approximately)
    o Guy ropes: 4
    o Ground anchors: Galvanized steel , qty: 5
    o Doors: 1
    o Vestibules: 1
    o Capacity: 2 persons
    o Door of inner tent has 2 layers of mesh and fabric. The roof of inner tent has mesh for ventilation too.
    o All our tents have YKK Zippers (made in Japan)

    Sale!
  • This is an all-rounder climbing harness designed specifically for lead climbers. The well thought out features and its ergonomic design makes this one harness very versatile and suitable for many forms of climbing. This harness features our Lean waist belt. It above normal width but countered and lean design makes for a perfect fit around your waist. This feature was added keeping the route openers in mind who might have to hang in their harnesses for longer durations while bolting a new route.

    TECHNICAL SPECIFICATIONS

    • Waist belt strength rating: 18kN. For your comparison UIAA’s minimum requirement: 10kN)
    • Belay Loop breaking strength: 26kN. UIAA’s minimum requirement is 15kN
    • Buckles: Stainless Steel. Breaking strength = 16kN
    • the harness is made from BLUESIGN certified breathable and water repellent Sympatex fabric. The fabric is a three layered bonded fabric that is made in Japan.
    • Haul Loop on the rear rated at 5kN
    • Molded gear loops: 4
    • Leg Loops: Elasticated
    • This is a Unisex harness
    • Weight: 300gms
    • EN 12277, CE

    Recommended Use

    Lead climbing, trad climbing, sport climbing, mountaineering

    Sale!

Showing 1–12 of 68 results