Description
– A very useful equipment for aid climbing on technical routes or for ascending on ropes.
– Double reinforced eye-hole.
– Guarantee: Two years.
₹2,300.00
– Material: Nylon.
– Weight: 250 Gms.
– Length: 180 cms.
– Colour: Grey/Blue.
– Foot loops rated at 5 KN.
– Can be anchored on ascenders using a carabiner through the eye hole. Also for independent use on overhangs and roofs.
– Foot loops reinforced with heavy duty nylon.
– A very useful equipment for aid climbing on technical routes or for ascending on ropes.
– Double reinforced eye-hole.
– Guarantee: Two years.
You must be logged in to post a comment.
– Stainless Steel 304 Rock hangers for outdoor use (not marine grade).
– Bore diameter: 12mm
– This hanger features chamfered edges of the eye hole to minimize wear on carabiner. The eye hole itself is large enough to accommodate two carabiners.
– Choose the bolt size carefully depending upon strength of base rock material. If the rock is soft or has uneven composition such as Sandstone and Limestone, then any rock anchor, including ours will not be strong enough to endure heavy loading.
– This anchor is not recommended for use in coastal areas because it may not last as long as it normally should. For areas within 100 kms of coastline we recommend the anchors must be made in marine grade Stainless Steel. Contact us if you want these to be custom made!
– If you are combining our hangers with your own bolts, ensure that they are made from the same grade of metal.
– Each hanger is tested at a proof load of 8kN before shipping. You will be able to see a very small indentation on the side of the eye-hole. That is because it was tested in our lab for your safety.
The recommendation below is based on several assumptions. Do your own due diligence before installing an anchor anywhere.
M10 bolt: Only to be used in very hard rocks such as Granite (Compressive Strength > 75MPa)
M12 Bolt: Only to be used in medium to high hardness rocks such as Sandstone (Compressive Strength > 30MPa)
– EN959:2007, CE3076
User Instructions Download the PDF
User Instructions Download the PDF
– Stainless Steel 304 Rock hangers for outdoor use (not marine grade).
– Bore diameter: 10mm
– This hanger features chamfered edges of the eye hole to minimize wear on carabiner. The eye hole itself is large enough to accommodate two carabiners.
– Choose the bolt size carefully depending upon strength of base rock material. If the rock is soft or has uneven composition such as Sandstone and Limestone, then any rock anchor, including ours will not be strong enough to endure heavy loading.
– This anchor is not recommended for use in coastal areas because it may not last as long as it normally should. For areas within 100 kms of coastline we recommend the anchors must be made in marine grade Stainless Steel. Contact us if you want these to be custom made!
– If you are combining our hangers with your own bolts, ensure that they are made from the same grade of metal.
– Each hanger is tested at a proof load of 8kN before shipping. You will be able to see a very small indentation on the side of the eye-hole. That is because it was tested in our lab for your safety.
The recommendation below is based on several assumptions. Do your own due diligence before installing an anchor anywhere.
M10 bolt: Only to be used in very hard rocks such as Granite (Compressive Strength > 75MPa)
M12 Bolt: Only to be used in medium to high hardness rocks such as Sandstone (Compressive Strength > 30MPa)
– EN959:2007, CE3076
User Instructions Download the PDF
User Instructions Download the PDF
VAJRA is our 10 mm Type B Low Stretch Static rope designed for abseiling (rappelling), canyoning, fixed rope, roping up, zip-lining and a bunch of other adventure activities that requires very low stretch.
Available in multiples of five meters. Enter the number of meters you require under Quantity. For quantities higher than 100 meters the rope is shipped on a spool.
TECHNICAL SPECIFICATIONS
VAJRA 10 mm
Construction: Kernmantle
Core Material: 100% Polyamide
Sheath Material: 100% Polyamide
Weight: 57.7 gm/meter
Breaking strength without knots: 26 kN
Breaking Strength with an overhand knot: 19 kN
Sheath to Core ratio: 43% : 57%
Knotability coefficient: 0.9
Shrinkage: 3.6%
Minimum number of factor one falls before breaking under 80 kg load: 8
Elongation under 50/150 load configuration: 1.5%
Impact Force with factor fall 0.3: 5.2 kN
Sheath Slippage: 0.1%
EN 1891, CE 1019 and UIAA 107
– Pack of 5
– Stainless Steel 304 Rock hangers for outdoor use (not marine grade).
– Bore diameter: 10mm
– This hanger features chamfered edges of the eye hole to minimize wear on carabiner. The eye hole itself is large enough to accommodate two carabiners.
– Choose the bolt size carefully depending upon strength of base rock material. If the rock is soft or has uneven composition such as Sandstone and Limestone, then any rock anchor, including ours will not be strong enough to endure heavy loading.
– This anchor is not recommended for use in coastal areas because it may not last as long as it normally should. For areas within 100 kms of coastline we recommend the anchors must be made in marine grade Stainless Steel. Contact us if you want these to be custom made!
– If you are combining our hangers with your own bolts, ensure that they are made from the same grade of metal.
– Each hanger is tested at a proof load of 8kN before shipping. You will be able to see a very small indentation on the side of the eye-hole. That is because it was tested in our lab for your safety.
The recommendation below is based on several assumptions. Do your own due diligence before installing an anchor anywhere.
M10 bolt: Only to be used in very hard rocks such as Granite (Compressive Strength > 75MPa)
M12 Bolt: Only to be used in medium to high hardness rocks such as Sandstone (Compressive Strength > 30MPa)
– EN959:2007, CE3076
User Instructions Download the PDF
User Instructions Download the PDF
Reviews
There are no reviews yet!